Types of wheels
Configurations of wheels
Sizes of tyres
Tyres in our warehouse
01 | THE PROJECT10%
Our engineers design wheels based on European and global ETRTO, EUWA and TRA standards.
02 | VISUALISATION20%
We create a wheel design in 3D to evaluate its appearance and technical parameters.
03 | RAW MATERIAL30%
We order steel from reliable suppliers – U.S. Steel and ArcelorMittal.
04 | STEEL PREPARATION40%
We store steel in our own steel warehouse in Narew, where we cut the material to the appropriate size in preparation for further processing during production.
05 | BARE RIM PROFILING50%
We create bare rims with thickness of up to 10 mm and a width of up to 44 inches on the production lines for profiling bare rims designed and produced at PRONAR.
06 | STAMPING DISCS60%
Pronar factory in Narewka cuts and stamps wheel discs.
07 | WELDING OF COMPONENTS70%
Steel wheels, discs and bare rims are welded by our welding robots. Thanks to them we can maintain the highest repeatability of our wheels.
08 | SURFACE PROTECTION80%
The welded wheels are passed to the paint shop. Here, first of all, we secure their surface using modern and ecological solutions – nanoceramics and cataphoresis. This combination guarantees high corrosion resistance and excellent surface preparation for painting.
09 | POWDER PAINTING90%
The wheels are powder coated on our automated painting line. We offer clients a full range of RAL colours, including special colours.
10 | TESTS AND TRIALS100%
Before the wheels reach customers, we conduct a number of trials and tests in our Research and Development Center and independent laboratories with which we cooperate. The checks include: FEM (MES) computer analysis, load-driving simulation, cornering simulation, testing of chemical composition, hardness, impact strength and fatigue life of steel, micro- and macroscopic tests, ultrasonic and X-ray tests, and tests of paint coating durability in a salt chamber climate.
WE ARE A NATIONAL DISTRIBUTOR OF TYRES
We are the official distributor of top manufacturers.
WE FEEL SOCIALLY RESPONSIBLE
We meet global standards
We have implemented and consistently maintain the quality management system ISO 9001: 2015 since 2001. We design wheels according to the global standards ETRTO, EUWA. TRA. We use checking procedures: PPAP-APQP, 8D Reports, FMEA, Pareto Analysis. In conclusion, you can be sure that the wheels and tyres that we offer meet European and global standards.
We care about the environment
We have ISO 14001: 2005 certificate confirming our activities for environmental protection and pollution prevention. For example, Pronar wheels in the final stage of production are subjected to multi-stage painting with the use of ecological solutions such as nanoceramics and cataphoresis.
We employ thousands of people
All Pronar factories, including our wheels’ production, are located in small towns. As a result, Pronar is usually the largest employer in the area. We are aware of our responsibility, which is why we conduct our business with respect for the interests of local communities and the surrounding nature.
BY VISITING OUR SITE YOU CAN HAVE A CLOSER LOOK
on every aspect of Pronar Wheels, the way we operate and what we do every day.